Описание
Заполнитель
Simple and solid structure Strong lateral force resistance and offset load Low center of gravity, easy to install High accuracy and long-term stability Optional measurement range: 5-1000kN (approximate 0.5-100t)
Description | ||
Material | Alloy Steel or Stainless Steel | |
Rated Load (kN) | 5/10/20/30/50/70/100/200/300/500/1000 | |
Performance Indicator | ||
Overall Precision | 0.05(linearity+ hysteresis + repeatability) | |
Sensitivity | 2.0 mV/V | |
Excitation Voltage | 5- 12V DC (recommend 5V ) | |
Creep (in 30 min) | ±0.05%F.S/30min | |
Zero balance | ±1%FS | |
Input Resistance | 380±10Ω or 750±15Ω | |
Output Resistance | 350±3Ω or 700±5Ω | |
Insulation Resistance | ≥5000MΩ | |
Working Environment | ||
Safety Overload | 150%F.S | |
Operation Temperature Range | -20 to +65ºC | |
Zero Drift | ±0.05%F.S/10ºC | |
Output Drift | ±0.05%F.S/10ºC | |
Protection Class | IP65 |
Optional Range | USD Price (without freight) |
500kg/1t/2t/3t | 115.00 |
5t | 125.00 |
10t/20t | 131.00 |
25t | 163.00 |
30t | 192.00 |
50t | 288.00 |
60t | 355.00 |
100t | 537.00 |
Please note that price is not same for all the optional range. please leave message for us for different range. Our default price USD 115 is for 500kg/1t/2t/3t |
When you choose load cell, please pay attention to below:
Force direction, installing mode Load cell capacity: Please make sure not overload. Measured load should be 50-70% of load cell rated capacity. Sensitivity Load cell output mV signal. Load cell cable length can affect load cell output, so please use transmitter/amplifier to transit 0-5V, 4-20mA or digital sPlease read our manual carefully to get more info before you use our product.
The product is dealt with sealing protection in the process of producing. So if meeting any fault, please do not knock beam body or open it to maintain at your own discretion, and do not disassembly the parts in load cell.
Attention:
Load cell is high precision components. To make sure measured precision, controlling force should be transferred with any influence of eccentric load and lateral load. In the measurement, action line of outside force should coincide with load cell stressing axis. Please follow force direction on the beam of load cell to use it. When install load cell, please avoid strong impact or wiring and beam broken caused by strong pulling. Please keep load cell in -10℃to 65℃ and relative humidity less than 75% for long-term unused condition. Please do not make any soldering jobs on the load cell carrying device. Not use in the water for load cell without any special treatment. Wire should be connected reliably, and not connect to metallic conductor. If order several load cell and transmitter, digital meter etc. and need to match each one, please follow serial number on sticker to connect them.Характеристики
- Номер модели
- LCS-C2B
- Бренд
- SMOWO
- optional range
- 500kg/1t/2/3t
- material
- alloy steel
- output
- mV signal
- sensitivity
- 2.0mV/V (minus or plus 10%)